FireCompact 400™

Printed Circuit

Board Dimensions

3U Eurocard (100x160mm2), front panel 4HP (20.2mm) EMV shielded, ejection lever

CompactPCI Bus

Connector J1

• 32-bit, 33MHz (133MB/s)
• 32-bit DMA bus master (133MB/s)
• PCI burst mode
• 3.3V or 5V interface

Power Consumption

Connector J1

+5V ±5% 0.1A max. +3.3V ±0.3V 0.3A max. +12V ±5% 0.1A max.
(without 1394 cable power charge) VIO +3.3V or +5V, max. 0.1A

Temperature/Humidity

Commercial Grade Version

Operation temperature 0-70°C Humidity 5-90% non condensing

IEEE-1394

Connectors FW1-3

Molex connectors 6-position, including power distribution (+12V/1A), individually fused by Polyswitch resettable fuse

Cable Type

Shielded, 2 power conductors (power pair), 2x2 signal conductors (twisted pair, each pair shielded) Differential A, Differential B

Data Transfer Rate

Link Layer Controller: 100, 200 and 400Mbps PHY Transceiver: 100, 200 and 400Mbps

Controller Chip

TI PCILynx-2 TSB12LV21B Link Layer Controller, Zoom Video Port

PHY Chip

TI TSB41AB3 or TSB41LV03A IEEE-1394 triple-cable transceiver/arbiter, cable port monitor, cable power monitor, transceiver disabled when cable not active, short reset, compatible to 1394-1995 and 1394a-2000, switching regulator powers PHY from cable when board is switched off (hub function maintained)

LED Array

1x2 LED, cable active node(s), PHY power