| Fire-i™ 720 SXGA, 2/3"
CCD, 20 fps firewire camera
|
Part numbers |
Fire-i 720c (Color): 4447 |
Fire-i 720b (Monochrome): 4448 |
| Image
Sensor |
2/3"
progressive scan CCD
Sony ICX-285AQ |
2/3"
progressive scan CCD
Sony ICX-285AL |
| Effective Pixels |
1450000
pixels 1388(H) x 1036(V) |
1450000 pixels 1392(H) x
1040(V) |
| Picture Size |
1280 x 960, 1024 x 768, 800 x 600, 640 x 480 |
| Data Path |
8 bit or 12
bit color RAW - 16 YUV 4:2:2 |
8 bit
or 12 bit b/w |
| CELL size |
6.45 um x 6.45 um |
| Scanning System |
Progressive Scan |
| Frame Rate |
20 (Format-7 mode 0), 15, 7.5, 3.75,
1.875 |
|
Binning |
2x2, 1x2 |
|
External Trigger |
Software or Hardware Trigger, modes:
0, 1, 2, 3, 4, 5, 14, 15 |
|
Control Functions |
Auto-Exposure,
Auto-shutter, Brightness, Sharpness |
| Lens Mount |
C-mount |
| Digital Interface |
1 x 1394a 6pin port / IIDC v1.31
- 8~30V DC from cable |
| Transfer Rate |
400 Mbps/max |
| Gain Control |
0 ~ 25 dB |
0 ~ 27 dB |
| Shutter Speed |
1 usec
~ 3600 sec |
| Gamma |
0.4 ~ 2.5 |
| External Trigger |
Mode 0, 1, 2, 3, 4, 5, 14 |
| Strobe Output Signal |
Active High, normal or trigger mode |
|
Advanced Features |
Pixel Binning via Format-7 (2x2,
1x2), Strobe RS-232 pass through,
One shot & multi shot, Multi camera auto-sync (-144 us ~ +144 us at 15,7.5 frame rate) |
| S/N ratio |
56 dB or better |
| Power
Requirements |
265 mA max, @ +12V DC |
| Dimensions
/ Weight |
64 (W) x 64 (H) x 60 (D) mm
/ 300 gr. approx |
| Operation Temp. |
-5 to +45°C |
| Storage Temp. |
-20 to +60°C |
| Regulations |
FCC, CE, MIC,
RoHS |
| Supplied Accessories |
Lens cover, Unibrain Fire-i
drivers & Fire-i API SDK, 4.5m 1394a cable |
|
