ubCore™ 1394a - 1394b Windows drivers Product History
|
August 2008 - Version 5.52
- Added: Fire-i X ActiveX control/SDK library in ubCore Pro runtimes.
- Fixed: SBP2 driver crash in volumes larger than 4 TB.
- Fixed: SBP2 driver fails to recognize multiple external hard drives at boot.
- Fixed: NMI system crash on certain Xeon systems during isochronous transmit.
- Fixed: SBM produces gap_count 63 when the zero ping bug is in effect.
June 2008 - Version 5.51
- Added: Support for RAID external hard drive enclosures.
- Added: Fire-i Ms stack (fidcam.sys) added in ubCore Pro setup.
- Added: Add capability in CFiCamera to select the video format with a GUI.
- Fixed: Image streaming freezing periodically at 60 fps (or more) in Firei application.
- Many improvements and various minor fixes in FireViewer, ubSwitch, FireIIDC utilities.
February 2008 - Version 5.50
- Added: DMA channel multiplexing at the driver level, completely transparent to user mode.
- Added: NDIS 6.0 support for Firenet driver in Windows Vista 32/64 bit for improved performance.
- Added: Maximum 64 adapters supported by all drivers in ubCore.
- Added: RAW-8 mode support in Fire-i WDM driver and Firei.dll.
- Added: RAW mode support and Format-7 color codings in Firei.dll.
(ubCore Pro only)
- Added: Advanced features support in new Sony, PointGrey and AVT 1394b cameras.
(ubCore Pro only)
- Added: Many new features/commands in FireViewer, FireCommander and Fire-i IIDC applications
(ubCore Pro only)
October 2007 - Version 5.21
- Fixed: Significant improvement in system stability on Windows Vista when sleeping/resuming with FireNet installed.
- Fixed: Fatal NMI error during setup on specific computer hardware with 1394b PCI adapters.
- Fixed: Incorrect isochronous timeout handling causes OS resource leaks on x86/x64 systems.
- Fixed: Serial Bus Manager driver now supports more than 4 firewire adapters.
- Fixed: IIDC camera driver (UBDCAM.SYS) sets initial max packet size for Format 7 correctly.
- Added: DMA limit for iso operations based on operating system and hardware.
- Added: IIDC camera driver (UBDCAM.SYS) automatically breaks image iso requests according to DMA limit.
June 2007 - Version 5.20
- Added support for
LSI (Agere) FW643 1394b to PCI express chipset.
- Added ISO command in FireCommander for performing isochronous operations.
- Fixed: system crash when doing multiple concurrent isochronous receives.
- Fixed: Firei.exe crashes sometimes when copying video file after capture.
(ubCore Pro only)
May 2007 - Version 5.13
- Singed drivers for Windows Vista 32 and 64 bit editions.
- Added: x86 FireAPI applications can run on x64 systems.
- Added: 64-bit Fire-i application on x64 systems.
(ubCore Pro only)
- Dual x86/x64 DirectShow Filter support on x64 systems.
(ubCore Pro only)
- NEW!: FireIIDC™ camera control application, based on firei.dll
(ubCore Pro only)
January 2007 - Version 5.12
- Added: Complete and improved redesign of the installation engine.
- Fixed: Improved support for Windows Vista (RTM)
- Fixed: IIDC drivers fail to operate with cameras that fail read/write requests with resp_conflict.
- Fixed: Improved support for AVT Pike 1394b cameras.
- Fixed: High resolution image streams cause IIDC driver video to halt.
December 2006 - Version 5.11
- Added: Windows Vista (32 bit) support.
- Added: Multiple new commands in FireCommander & ubTweak utilities
(ubCore Pro only)
- Fixed: Maxtor One-Touch™ external 1394b hard drives incompatibility
- Fixed: Multiple Firenet network driver power management issues
- Fixed: Minor issues with specific IIDC cameras which respond with delay in very fast computers (ubCore Pro only)
October 2006 - Version 5.10
- Added: Custom Configuration ROM contents (virtual devices).
- New improved SDK license/activation utility.
(ubCorePro only)
- Added: Ability to change the maximum address range size.
- Added: Multiple freeing of Map Registers by
ubohci.sys.
- Fixed various issues in the isochronous engine.
- New enhanced versions of ubTweak, FireCommander and ubSwitch utilities. (ubCore Pro only)
- Various bug fixes in IIDC and Firenet drivers
|
|
June 2006 -
Version 5.0
- Important bug fixes and driver performance improvements.
- Added ubTweak™, driver configuration/tuning utility
(ubCorePro only).
- Added support for Oxford 922 RAID external hard drives (SBP2 driver).
- The drivers are now compliant with
1394 Trade Association Base 1394 test.
- Added ability to disable Plug & Play for certain devices.
February 2006 - Version 4.0
- Full Windows Plug & Play support. Easy switch between Unibrain and Microsoft driver via a single click ("ubswitch" application).
- Added support for Windows Power Management.
- Added support for Windows 2003 Server Operating System.
- Added support for Windows XP 64 bit (AMD Athlon 64 and Intel EM64t).
- Added IIDC 1394 cameras DirectShow WDM compliant driver and control
application.
- Added support for 1394b (Firewire-800) IIDC cameras.
- Added support for S1600/S3200.
July 2003 - Version 3.0
- Added support for 1394b (Firewire-800).
- Added support for SBP2 interface.
- Added FireShare application.
- Added support for FireBoard Blue™.
- Added support for FireBoard 800™.
- Added support for PCMCIA OHCI cards.
- Added support for optical cables and repeaters.
April 2002 - Version 2.1
- Added support for Windows XP.
- Added support for 3rd party OHCI cards.
September 2001 - Version 2.0
- Added support for FireBoard 400-OHCI card.
- Added support for Windows ME.
July 2000 - Version 1.6
- Added support for Windows 2000.
June 1999 - Version 1.5
- Added support for IIDC cameras.
- Added support for Windows 98SE.
June 1998 -
Version 1.0
|
|
